Subject: [FlyRotary] Re: Injectors

My solution was to simply move the staging relay from the secondary power circuit to the primary power circuit, so it runs on the secondary at low power and all 6 at higher power (20B).  Problem solved.
This may not be a solution for every case, as my secondary injectors are not all that far from the ports.
 

Hi Al, I have the same injectors like you. How do you do the modification with the relay?

Buly;

The staging relay normally switches the power on or off to the secondary injectors.  Just wire your primary power lead through the relay instead. Everything else remains the same.

I was about to change my wiring harness so the I had enough length to switch primary and secondary when suddenly the light came on (in my head), and I realized I only had to change the power lead.

Al