Return-Path: Received: from fed1rmmtao05.cox.net ([68.230.241.34] verified) by logan.com (CommuniGate Pro SMTP 4.2.5) with ESMTP id 568644 for flyrotary@lancaironline.net; Wed, 15 Dec 2004 12:14:05 -0500 Received-SPF: none receiver=logan.com; client-ip=68.230.241.34; envelope-from=ALVentures@cox.net Received: from BigAl ([68.7.14.39]) by fed1rmmtao05.cox.net (InterMail vM.6.01.04.00 201-2131-117-20041022) with ESMTP id <20041215171332.MAZK16028.fed1rmmtao05.cox.net@BigAl> for ; Wed, 15 Dec 2004 12:13:32 -0500 From: "Al Gietzen" To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Re: Injectors Date: Wed, 15 Dec 2004 09:13:49 -0800 Message-ID: <000a01c4e2c9$71a66290$6400a8c0@BigAl> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000B_01C4E286.63832290" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.6626 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 In-Reply-To: This is a multi-part message in MIME format. ------=_NextPart_000_000B_01C4E286.63832290 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Subject: [FlyRotary] Re: Injectors =20 My solution was to simply move the staging relay from the secondary = power circuit to the primary power circuit, so it runs on the secondary at low power and all 6 at higher power (20B). Problem solved. This may not be a solution for every case, as my secondary injectors are = not all that far from the ports. =20 Hi Al, I have the same injectors like you. How do you do the = modification with the relay? Buly;=20 The staging relay normally switches the power on or off to the secondary injectors. Just wire your primary power lead through the relay instead. Everything else remains the same. I was about to change my wiring harness so the I had enough length to = switch primary and secondary when suddenly the light came on (in my head), and = I realized I only had to change the power lead. Al ------=_NextPart_000_000B_01C4E286.63832290 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Re: [FlyRotary] Re: Injectors

Subject: [FlyRotary] Re: Injectors

 

My = solution was to simply move the staging relay from the secondary power circuit to = the primary power circuit, so it runs on the secondary at low power and all = 6 at higher power (20B). =  Problem solved.
This may not be a solution for every case, as my secondary injectors are = not all that far from the ports.
 

Hi Al, I have the same injectors like you. How do you do the modification = with the relay?

Buly;

The staging relay normally switches the = power on or off to the secondary injectors.  Just wire your primary power = lead through the relay instead. Everything else remains the = same.

I was about to change my wiring harness = so the I had enough length to switch primary and secondary when suddenly the = light came on (in my head), and I realized I only had to change the power = lead.

Al

------=_NextPart_000_000B_01C4E286.63832290--