Subject:
[FlyRotary] Re: Injectors
My
solution was to simply move the staging relay from the secondary power
circuit to the primary power circuit, so it runs on the secondary at low
power and all 6 at higher power (20B).
Problem solved.
This may not be a solution for every case, as my
secondary injectors are not all that far from the
ports.
Hi
Al, I have the same injectors like you. How do you do the modification with
the relay?
Buly;
The staging relay
normally switches the power on or off to the secondary injectors. Just
wire your primary power lead through the relay instead. Everything else
remains the same.
I was about to
change my wiring harness so the I had enough length to switch primary and
secondary when suddenly the light came on (in my head), and I realized I only
had to change the power lead.
Al