Return-Path: Received: from [65.54.168.110] (HELO hotmail.com) by logan.com (CommuniGate Pro SMTP 4.2.5) with ESMTP id 568697 for flyrotary@lancaironline.net; Wed, 15 Dec 2004 12:27:12 -0500 Received-SPF: pass receiver=logan.com; client-ip=65.54.168.110; envelope-from=lors01@msn.com Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Wed, 15 Dec 2004 09:26:02 -0800 Message-ID: Received: from 4.174.5.50 by BAY3-DAV6.phx.gbl with DAV; Wed, 15 Dec 2004 17:25:47 +0000 X-Originating-IP: [4.174.5.50] X-Originating-Email: [lors01@msn.com] X-Sender: lors01@msn.com From: "Tracy Crook" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: Injectors Date: Wed, 15 Dec 2004 12:22:52 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_01C9_01C4E2A0.CCA003A0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: MSN 9 X-MimeOLE: Produced By MSN MimeOLE V9.10.0009.2900 Seal-Send-Time: Wed, 15 Dec 2004 12:22:52 -0500 X-OriginalArrivalTime: 15 Dec 2004 17:26:02.0197 (UTC) FILETIME=[264C0050:01C4E2CB] This is a multi-part message in MIME format. ------=_NextPart_000_01C9_01C4E2A0.CCA003A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Re: [FlyRotary] Re: Injectors Remember, ONLY the 20B has a staging = relay. If you want to do this on a 13B installation, swap the pri & sec = injector lines at the EC2 connector or swap the injector connectors if = you have enough wire slack to do this. Tracy =20 ----- Original Message -----=20 From: Al Gietzen=20 To: Rotary motors in aircraft=20 Sent: Wednesday, December 15, 2004 12:13 PM Subject: [FlyRotary] Re: Injectors Subject: [FlyRotary] Re: Injectors My solution was to simply move the staging relay from the secondary = power circuit to the primary power circuit, so it runs on the secondary = at low power and all 6 at higher power (20B). Problem solved. This may not be a solution for every case, as my secondary injectors = are not all that far from the ports. =20 Hi Al, I have the same injectors like you. How do you do the = modification with the relay? Buly;=20 The staging relay normally switches the power on or off to the = secondary injectors. Just wire your primary power lead through the = relay instead. Everything else remains the same. I was about to change my wiring harness so the I had enough length to = switch primary and secondary when suddenly the light came on (in my = head), and I realized I only had to change the power lead. Al ------=_NextPart_000_01C9_01C4E2A0.CCA003A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Re: [FlyRotary] Re: Injectors
  Remember, ONLY the 20B has a staging relay.  If you = want to do=20 this on a 13B installation, swap the pri & sec injector lines = at the=20 EC2 connector or swap the injector connectors if you have enough = wire slack=20 to do this.
 
Tracy  
----- Original Message -----
From: Al Gietzen
To: Rotary motors in = aircraft
Sent: Wednesday, December 15, = 2004 12:13=20 PM
Subject: [FlyRotary] Re: = Injectors

Subject:=20 [FlyRotary] Re: Injectors

 

My=20 solution was to simply move the staging relay from the secondary = power=20 circuit to the primary power circuit, so it runs on the secondary at = low=20 power and all 6 at higher power = (20B).=20  Problem solved.
This may not be a solution for every case, = as my=20 secondary injectors are not all that far from the=20 ports.
 

Hi=20 Al, I have the same injectors like you. How do you do the modification = with=20 the relay?

Buly;=20

The = staging relay=20 normally switches the power on or off to the secondary injectors. =  Just=20 wire your primary power lead through the relay instead. Everything = else=20 remains the same.

I was = about to=20 change my wiring harness so the I had enough length to switch primary = and=20 secondary when suddenly the light came on (in my head), and I realized = I only=20 had to change the power lead.

Al

------=_NextPart_000_01C9_01C4E2A0.CCA003A0--