Mailing List flyrotary@lancaironline.net Message #11357
From: keltro@att.n <keltro@att.net>
Subject: Re: [FlyRotary] Re: PROP SPINNER ADVISE NEEDED
Date: Mon, 13 Sep 2004 04:17:27 +0000
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
  -------------- Original message from Bulent Aliev : --------------
On 9/12/04 11:01 AM, "Kelly Troyer" <keltro@att.net> wrote:

Guys I am about to cut metal to fit a  16 inch spinner to my three blade

"IVO" propeller and would like any advise on  your favorite methods

of making a pattern of the prop to avoid ruining a very expensive piece

of aluminum. Attached is CDP (cheap digital photo) of what I am

dealing with. All comments and advice appreciated.

Thanks,
--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2

There is a way, but you have to work with fiberglass. Are you up to it? Some builders act like “girlie man” when there is a need to work with fiberglass :)
Bulent

 

>> I am all ears Bulent...... Let me hear your method!!

 

 

     Kelly

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster