Return-Path: Received: from mtiwmhc13.worldnet.att.net ([204.127.131.117] verified) by logan.com (CommuniGate Pro SMTP 4.2.1) with ESMTP id 408283 for flyrotary@lancaironline.net; Mon, 13 Sep 2004 00:18:01 -0400 Received-SPF: none receiver=logan.com; client-ip=204.127.131.117; envelope-from=keltro@att.net Received: from 204.127.135.57 ([204.127.135.57]) by worldnet.att.net (mtiwmhc13) with SMTP id <2004091304172811300s2a4ge>; Mon, 13 Sep 2004 04:17:33 +0000 Received: from [209.247.222.96] by 204.127.135.57; Mon, 13 Sep 2004 04:17:27 +0000 From: keltro@att.net (Kelly Troyer) To: "Rotary motors in aircraft" Subject: Re: [FlyRotary] Re: PROP SPINNER ADVISE NEEDED Date: Mon, 13 Sep 2004 04:17:27 +0000 Message-Id: <091320040417.27297.41451F56000DD48400006AA12160376316019D9B040A05@att.net> X-Mailer: AT&T Message Center Version 1 (Jul 19 2004) X-Authenticated-Sender: a2VsdHJvQGF0dC5uZXQ= MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="NextPart_Webmail_9m3u9jl4l_27297_1095049047_0" --NextPart_Webmail_9m3u9jl4l_27297_1095049047_0 Content-Type: text/plain Content-Transfer-Encoding: 8bit -------------- Original message from Bulent Aliev : -------------- On 9/12/04 11:01 AM, "Kelly Troyer" wrote: Guys I am about to cut metal to fit a 16 inch spinner to my three blade "IVO" propeller and would like any advise on your favorite methods of making a pattern of the prop to avoid ruining a very expensive piece of aluminum. Attached is CDP (cheap digital photo) of what I am dealing with. All comments and advice appreciated. Thanks, -- Kelly Troyer Dyke Delta/13B/RD1C/EC2 There is a way, but you have to work with fiberglass. Are you up to it? Some builders act like “girlie man” when there is a need to work with fiberglass :) Bulent >> I am all ears Bulent...... Let me hear your method!! Kelly --NextPart_Webmail_9m3u9jl4l_27297_1095049047_0 Content-Type: text/html Content-Transfer-Encoding: 8bit

-------------- Original message from Bulent Aliev : --------------
On 9/12/04 11:01 AM, "Kelly Troyer" <keltro@att.net> wrote:

Guys I am about to cut metal to fit a 16 inch spinner to my three blade

"IVO" propeller and would like any advise on your favorite methods

of making a pattern of the prop to avoid ruining a very expensive piece

of aluminum. Attached is CDP (cheap digital photo) of what I am

dealing with. All comments and advice appreciated.

Thanks,
--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2

There is a way, but you have to work with fiberglass. Are you up to it? Some builders act like “girlie man” when there is a need to work with fiberglass :)
Bulent

>> I am all ears Bulent...... Let me hear your method!!

Kelly

--NextPart_Webmail_9m3u9jl4l_27297_1095049047_0--