|
|
| After two days of skinned knuckles and scraped arms I have finally been able to remove the flap motor/micro switch assembly from that tiny little space between the seats of my 235. The system had failed in flight. The motor powered screw drive has a ring of tine ball bearings which follow the screw grooves and move the actuating arm which is attached to the flap assembly. My ball bearing ring failed. I talked to Michelle at Lancair and they have the item (later models use the same system) but they are made in Sweden and cost a king's ransom. I'm writing this on the outside (very outside) chance that someone might have one of these units gathering dust on a shelf. If so, please send me a msg at pathabu@aol.com. Pat Halloran
|
|