----- Original Message -----
Sent: Tuesday, June 01, 2004 9:09
PM
Subject: [FlyRotary] Re: Rev-2.1 part
1
I don't see your regulator in these pics? I assume you've firewall
mounted it? What kind do you have? I'm looking for one that is adjustable,
manifold referenced, remote mountable, exchangeable fittings and cheap
(or at least not too$$$)
I was with you right
up to the cheap part :-) Mine is located on the cool side of
the firewall, and I have the 15404 listed
here:
Rusty (well regulated, if not well
adjusted)
Hi, Tommy.....I have the TWM Induction adjustable
fuel pressure regulator. Mine came from Dave Atkins already installed in the
fuel rail. Looking at www.twminduction.com/Regulator/Regulator.html
I see that it is available both with the fuel rail fittings, or -6 threaded
fuel line fittings. Don't know what it cost, because I purchased the
entire EFI/Ignition setup from Dave, with the throttlebody, injectors,
regulator, temp sensors, MicroTech EFI, plugs and silicone plug wires, crank
angle sensor, etc, etc, so I can't break it down pricewise. Hope this is
of some help. Paul Conner