|
13B Intake Manifolds
Paul Conner--
I was looking at that picture of your manifold you
enclosed. It seemed like you only had two injectors.
If true, what kind of fuel flow are they rated for
and what is the brand/model number? Those must be
big--no, MAMMOTH--injectors.
Barry Gardner
Wheaton, IL
----- Original Message -----
Sent: Wednesday, March 31, 2004 4:16
PM
Subject: [FlyRotary] Re: 13B Intake
Manifolds
Hi,
Alex....that is exactly what I used to build my manifold. I purchased it
from Mazdratrix, who got it from Austrailia. Because the two intakes
were not level, or perpendicular to the mounting flange, I had to cut it so
that it was parallel with the top of the engine, then I had the intake tubes
welded on. Here are a couple of old photos. The engine is now running,
and the intake seems to work very well. As it was, the manifold put the
throttlebody too high above the engine. Now, the throttlebody is on
the cool side of the engine, away from the exhaust. Hope this
helps. Paul Conner
|