flyrotary@lancaironline.net Mailing List Archive

And by the way I will be one of your first customers as I have a "Cassutt" project that

is begging for a Rotary engine (if I live long enough !!)................<:)

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo

From: Kelly Troyer <keltro@att.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Mon, April 25, 2011 7:25:33 PM
Subject: [FlyRotary] Re: Mistral 'Like' Intake

Jarrett,

One of the guys from the Pacific Northwest that used to post with the Flyrotary group a

few years ago made a wood and foam mockup of his vision of a Rotary back-plate and

had it mounted on a RV4 "Dynafocal" mount and firewall and showed it at his EAA chapter

meeting...........I have a photo of it on one of my computers..........For whatever reason he

did not go forward with it...............I bugged him periodically about the chances of it being

produced then finally gave up and bit the bullet ($$$) for the "Mistral" back-plate then had

to wait 2 years for it..............I really hope that with your talent and equipment it will become

a reality as I know it would really help "Standardize" Rotary installations from the current

mishmash of engine mounts............

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo

From: H & J Johnson <hjjohnson@sasktel.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Mon, April 25, 2011 6:26:49 PM
Subject: [FlyRotary] Re: Mistral 'Like' Intake

My wife was just asking me why I was drooling on the keyboard.. :) Once I get those scans in my hand..it is going to be hard to find time to sleep at night!

This is just incredible! I'm stuck w/ a perma-grin.

I just might have to roust up a 3D model of the mount here yet tonight!

Thanks for saving me the time of looking for it!

Jarrett Johnson
www.innovention-tech.com

Jarrett,

I found the "Dynafocal" info................Was on my other computer !!..................

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo

From: H & J Johnson <hjjohnson@sasktel.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Mon, April 25, 2011 11:21:48 AM
Subject: [FlyRotary] Re: Mistral 'Like' Intake

The scanning should give in the tens of thousands [0.01"] or less depending on what type of equipement used etc. That in conjunction w/ bolt hold placement that I already have [lots of collected data over the years] I should be able to duplicate the basic geometry. From there it will become a new product in that we want to make it something that works for everyone [or as many as possible] to make it a viable unit. That info, mixed w/ knowing what the 'Standard' mount geometry is should get us where we need to go.

Best regards

Jarrett Johnson
www.innovention-tech.com

----- Original Message -----

From: Kelly Troyer <keltro@att.net>

Date: Monday, April 25, 2011 10:03 am

Subject: [FlyRotary] Re: Mistral 'Like' Intake

> Jarrett,
>
> I do not know exactly what dimensions the scanning give you
> such as bolt
> hole placement, etc.........I presumed
> that the angles of the mount ears needed for the "Dynafoal" mounts
> would be
> "Dead" on though..........
>
>
> Kelly Troyer
> "DYKE DELTA JD2" (Eventually)
> "13B ROTARY"_ Engine
> "RWS"_RD1C/EC2/EM2
> "MISTRAL"_Backplate/Oil Manifold
> "TURBONETICS"_TO4E50 Turbo
>
>
>
>
> ________________________________
> From: H & J Johnson <hjjohnson@sasktel.net>
> To: Rotary motors in aircraft <flyrotary@lancaironline.net>
> Sent: Mon, April 25, 2011 10:49:43 AM
> Subject: [FlyRotary] Re: Mistral 'Like' Intake
>
> Excellent, now I just need to get some Dynafocal dimensions [I've
> seen it on
> the web in the past, just gotta re-locate the dimensional
> 'standards']. That in
> conjunction w/ a few scans & the picture will start to really take
> shape!
>
> I love progress :)
> I can't say Thanks enough Kelly, w/out the help of yourself and
> others it would
> be a much steeper curve to get it up to speed.
>
> Jarrett Johnson
> www.innovention-tech.com
> -- Homepage: http://www.flyrotary.com/ Archive and UnSub:
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
>

--    Homepage:  http://www.flyrotary.com/    Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html