flyrotary@lancaironline.net Mailing List Archive

Michael,

You are probably already aware of Vans "Mandatory" service bulletin about safety wiring the AN nuts on the fuel tubes inside the tanks? If not - you might want to check it out before prosealing.

http://www.vansaircraft.com/pdf/sb06-2-23.pdf

Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com
http://www.andersonee.com
http://members.cox.net/rogersda/rotary/configs.htm#N494BW
http://www.dmack.net/mazda/index.html

----- Original Message -----

From: MICHAEL D PARKER

To: Rotary motors in aircraft

Sent: Thursday, May 08, 2008 6:40 PM

Subject: [FlyRotary] Finishing RV Tank

I'm at the point of closing up fuel tanks on my RV-9a wing kit and question if there are any additional steps I need to add before the Proseal gets mixed.

Im assuming that I need to add fittings for the fuel return (from the pressure regulator) and another for transferring fuel from one tank to the other. Any suggestions? I have a 4-port Renesis engine.