|
|
Bobby J. Hughes wrote:
Saturday with the help of Mark Steitle I was able to start my renesis.
Had to run higher rpm's to keep to it running. Wideband O2 showed lean
at lower rpm's. Today after adjusting the fuel pressure to 42 psi (was
30 psi) I was able to idle much lower. My Advanced Flight System EFIS\
engine monitor fuel injector circuit is not putting out a tach signal so
no idea on the actual rpm's. Two primer clicks and it starts right up. Bobby J Hughes
Congratulations, Bobby. I'm behind you, but catching up fast. I hope any problems I run into are that simple to solve 8*)
--
http://www.ronpaultimeline.com
|
|