----- Original Message -----
Sent: Tuesday, February 05, 2008 8:36
PM
Subject: [FlyRotary] Re: Flex
plate(adendum)
Joe,
Forgot to add this.........It depends on the year model 13B
also........The 86 to 88.5
2nd gen had heavier rotors and what I reported is true.........The 88.5
to 91 2nd gen
13B have rotors the same weight as the 3rd gen and should be able to use
the 3rd
gen rear counterweight.........You have to be careful with the 88.5 to 89
2nd gen to
make sure you have the lighter rotors (they are 9.7 to1 and have a
machined rather
than a cast depressions in the rotor face)..........Sorry for the
omission..........
--
Kelly Troyer
"Dyke Delta"_13B
ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
--------------
Original message from "Kelly Troyer" <keltro@att.net>: --------------
Joe,
A 3rd gen counterweight and flex plate will fit 2nd gen
13B but the counterweight
will put the 2nd gen out of balance unless rotors and both
counterweights from the
3rd gen are installed also...........On another note if this engine is
for an A/C using
Tracy's redrive you must use a 2nd gen flexplate........FWIW
--
Kelly Troyer
"Dyke Delta"_13B
ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
--------------
Original message from "Joe Berki" <jskmberki@alltel.net>:
--------------
Will a flex plate and counterweight from a
3rd gen 13b fit a 2nd gen 13b? How much for a flex plate and
counterweight? Thanks for any help.
Joe berki
Limo EZ
No virus found in this incoming message.
Checked by AVG Free
Edition.
Version: 7.5.516 / Virus Database: 269.19.20/1261 - Release Date:
2/5/2008 8:57 PM