----- Original Message -----
Sent: Tuesday, July 31, 2007 12:58
PM
Subject: [FlyRotary] Re:
Unsubscribe...now, nice purchase
Sorry to hear of your problems. I know you are
chomping at the bit to get your plane flying. Did you make your own harness
for the EM2 and EC2? I am just thinking having it made up might help me
prevent some problems.
I
still need to come down and check out your plane and progress. I have been so
busy lately with my plane, work and family I haven't had a chance to come
down. Sure would like to check things out. Hopefully I won't have as much
frustration. I wonder if there isn't some way to avoid some of these problems
that seem to be inherent to these computers.
David Moyer
David,
I am thrilled to hear of your purchase. I was
saddened by Buly's choice, but more power to him...gotta admit that a few
days recently tracking down grimlins gets my mind to understand his
choice.....understand, even if not agree. For me it is just the
frustration of the moment, which at times is part of the fun.
Of course, today, as I re-terminated all
my wire runs (and then verified continuity of each line) for everything
connected to the ECU and EM2, fun was the last word I was shouting
out. Dang it.......I am still getting the EM2 stuck in calibration
mode. DOH! The engine did start right up though after all the
re-terminations, but the EM display continues to stay in calibration mode
(Select Channel 0; on the first line and Coolant Temperature on the second
line), when I press the button to clea it it flashes to the main screen for
about a second and goes back to the calibration mode. So, a lot a
effort but no forward progress. Opps, sorry, I degress to my current
frustration <g>
I guess I will try to give Tracy a call in the
morning...I think it is a tech support day or is Tracy out of town
again? Man, my timing sucks. Oh well. On with the
build.
All the best,
Chris