Greetings,

 

While looking at different flywheels for the single rotor, I noticed that some are for turbo, and some non turbo.  Naturally, all are for manual trans.  The starter I have now obviously works with the auto trans flexplate, but I don't recall which version of starter I originally ordered. 

 

The question-  Is there any difference in diameter, or tooth count between the auto flexplate, and manual trans flywheels, as long as I specify 86-91?  How about turbo vs non-turbo?  It appears that the turbo probably used a larger clutch, but I don't know if the starter ring was different. 

 

The REAL question- If I order a flywheel, will I end up with something that won't work with my current starter, or with the location in the RD-1C drive plate?  I realized that fore and aft spacing could be an issue.  

 

Thanks,

Rusty (wish the gmail POP server would come back to life)