|
Message
NOP
means not operating or something to that effect. I "think" it always says
that until the engine cranks.
Nope. It should read
zero when both units are on prior to cranking. One reason would be that the
EC2 isn't getting power.
Right you are
John (bet you don't here that very often <g>)! The NOP goes
away a couple seconds after turning on the EC-2. Of course in my case,
that was several hours later, after charging the battery because I left the EM-2
on last weekend and ran it down.
I'm also
paying for all those cracks about your oil leaks, because mine persists.
It appears to be around the front cover, so I liberally sprayed the area with
CRC, and slathered on the miracle gray sealer. Hope it stops, or it will
just have to leak, because I'm not pulling that cover now.
Rusty (5
hours major modification period flown off- released from test area
again)
|