|
|
Hi Bob, I have installed the same throttle body on my Cosmo 13B. No test
data yet
Buly
On 2/15/05 7:16 PM, "Bob White" <bob@bob-white.com> wrote:
Hi Jerry,
I noticed that the inlet to the TB has a slight taper and the actual TB
throat is only about 58 mm. Interestingly, That's also about 4.1 sq.
in. I have Tracy's RD-1C, so have some hope of making at 7500 rpm.
It fits real nice in the cowling. I had Bruce bend it up so the TB was
about 1 1/2 inches higher than if it was made horizontal. If I had left
it horizontal, the TB would have come real close to interfering with the
rubber isolator on the engine mount. I left the camera at home, so
couldn't take any pictures.
Bob White
On Tue, 15 Feb 2005 13:04:43 -0500
Jerry Hey <jerryhey@earthlink.net> wrote:
|
|