|
|
83-85 12a had the water/ oil cooler under the oil filter. Pre 83 had the oil cooler under the radiator... These were not very effective in the 2 rotor applications. If you decide to use this make sure you have ample radiator and ducting for air flow. (Smiles)
Kathy Atkins
AmericanRotaryEngine.com
AtkinsRotary.com
AtkinsRotaryMarine.com
Camdensuperchargers.com
AquaXtremes.com
RxTuner.com
-------Original Message-------
From: "Russell Duffy" <13brv3@bellsouth.net>
Subject: [FlyRotary] Re: 1st gen oil water heat exchanger wanted
Sent: 06 Jan 2005 20:52:27
OK, hold on now. I could have sworn that the 1st gen RX-7 had only the oil/water exchanger, but in looking through parts lists, it appears that it had that in addition to a normal oil cooler under the radiator. If that's the case, then the oil/water exchanger alone won't do me much good.
If you've got one, let me know, but I've got some more checking to do before I decide if it's worth messing with.
Thanks,
Rusty (had to open the window to get a breeze, new heat pump tomorrow)
-------Original Message-------
|
|