|
|
Hi John,
I considered the 3r gen coolers but I wondered why the car had concerns using these coolers. See http://www.negative-camber.org/crispyrx7/cwrcoolers.htm The only way to fit two of these coolers would be to mount them in different locations, or build a plenum setup like you did but I do not have the room. One of my options is to use the 2nd gen cooler and hope the resulting space for the rad will cool it. Pacific Oil coolers recommended the AeroClassic unit 18 rows p/n 8000353. Also if I use evap cores for water the 3rd gen coolers might work.
Joe
08:36 AM 12/16/2004 -0500, you (John Slade) wrote:
> Each airframe has it's own design form, fit, function limitations for the
> cooling system. In the case of the Limo EZ, it is difficult to
> fit a Mazda oil cooler and a radiator with adequate volume.
Joe - what about the 3rd gen stock cooler? It's about 10" * 6" * 2". Much
easier to fit in a tight space. I have two of these installed.
John
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|