Depends on what you are going to use it for, Bulent{:>) .  If as an Air/Fuel
ratio indicator, then it should work fine.  I can't recall if the stock one
on you engine is a heated (three-four wire) or unheated.  The only advantage
is you start getting indications immediately upon start up with the heated
version where as on the non-heated you have to wait until the exhaust gas
raises its temperature to operating range.

I got around 100 hours using 100LL with my original 02 sensor.  So if you
don't use leaded gas it should last several hundred hours.

Ed