|
|
Bulent,
Even with my old setup taxiing wasn't an issue. I could run on the ground
for long periods of time providing, I didn't run too high of power levels.
I could install fans if I had to, but I'll wait and see on that.
Steve
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Bulent Aliev
Sent: Sunday, August 22, 2004 7:17 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Getting there
On 8/22/04 4:51 PM, "Steve Brooks" <steve@tsisp.com> wrote:
My new cooling system is coming along. Attached are a couple of photos.
The first is a picture of the cooling assembly while sitting on the bench,
which houses the 2 evaporator cores and the oil cooler. The 2nd photo is
with it mounted in the plane.
Steve Brooks
Cozy MKIV N75CZ 13BT
Hi Steve, Looks good. I was contemplating similar setup. I just wander how
are you going to pass air through the cores while taxiing or waiting on line
for takeoff? I'll have an augmenter and maybe a fan.
Bulent
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|