|
|
On 8/1/04 4:40 PM, "ronmilligan@cox.net" <ronmilligan@cox.net> wrote:
Thanks everyone for all the help finding all my parts for my fuel system.
However, I seem to have hit a snag. I desire to use all AN fittings for the
fuel system. After ordering pumps from Tracy, Laura informed me (see email
below) that the inlet side is fixed as a barb connection. So again I must go
to the well of knowledge for help. Anybody out there have a part number or
source for an EFI pump capable of using AN fittings on both sides. Thanks
again.
Ron Milligan
RV7 QB Fuse
Aliso Viejo CA
Hi Ron, I was working on setting up my fuel system today. My pumps came from
Tracy with two removable hose barb fittings. I decided to keep the hose
barbs on the inlet size, since there is no pressure there and go to AN-6 for
the pressure side. Millions of autos are driving on hose barbs on both sides
with no problems.
Bulent
|
|