|
|
Thanks everyone for all the help finding all my parts for my fuel system. However, I seem to have hit a snag. I desire to use all AN fittings for the fuel system. After ordering pumps from Tracy, Laura informed me (see email below) that the inlet side is fixed as a barb connection. So again I must go to the well of knowledge for help. Anybody out there have a part number or source for an EFI pump capable of using AN fittings on both sides. Thanks again.
Ron Milligan
RV7 QB Fuse
Aliso Viejo CA Email From Laura Crook:
HI Ron - the pumps do vary in configuration based on what is available at the time. Here is the latest from the web site:
Note that these are AUTOMOTIVE EFI pumps and the exact configuration is subject to change. Pumps are always supplied with fittings and adaptors for 5/16 hose barb connections. The currently available model (7/2004) has a FIXED 5/16th hose barb on the INLET. The OUTLET end has an interchangeable fitting that can be changed to an AN6 adaptor (not supplied).
Bottom line is that, for the pumps we have today, only the OUTLET can be changed to an AN fitting. Based on that, let me know if you want them or not. Of course I'll be glad to send the EC2 guide either way.
We have no idea why Tracy's email no longer works for either of the Rotary Newsletters. I've checked his blocked message list (they are not on there); called MSN for 1 HOUR trying to work this out - reset his filters - no luck. We are debating whether to set up a new email address or what do to.
Sincerely,
Laura Crook
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|