|
|
I've always wondered why almost ALL cars never use AN fittings and their
fuel lines seldom leak. Somehow, with the number of cars on the road
that are fi, I think AN fuel lines are a waste, (if you do it right,
using the right clamps and lines!).
Marc Wiese
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
On
Behalf Of Scott
Sent: Thursday, July 29, 2004 6:41 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Fittings for Tracys Fuel Pumps Was Re: Fuel
Filter Part Number
>> <snip>
>>I have Tracy's fuel pumps as well, and I have a note
that says the fittings to convert those to
>>AN-6 are Earl's 991953. These are metric 10mm x
1.0P to AN-6.
I too purchased Tracy's pumps. The one's sent came
from NAPA marked as 3f27a380 purchased from Tracy in
November 2003. The screw in barb adapter on the high
pressure side of the pump is 3/8" with 24TPI.
Though oddly enough the ID of the tube is 7/32. Not
1/4 and not 3/16. Interesting...
Regards...
-Scott
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|