Hi Rob,
 I don't know the answer to that question so I'll pass it on to someone
who does. I don't think the porcupine look would do a whole lot for you
speed.
Vern

>>> RWolf99@aol.com 05/24/04 03:13PM >>>
I have the cowling clecoed to my 360 (I love the porcupine look) and
have a
question.

The side fasteners (top of cowl to bottom of cowl) are supposed to be 5

inches apart.  It would seem as though more than 5 inches are required
to provide
adequate clearance between the front cylinder and the back side of the
cowl
fasteners immediately adjacent thereto.  And yet, if you make the
spacing 6 or 7
inches around the front cylinder (which would probably be adequate
structurally), and drop back to 5 inch spacing elsewhere, it would look
unsightly.

Can't have that, ya know...

What have y'all done for cowling fasteners between the top and bottom
cowls
in the vicinity of the front cylinder?

Thanks.

Rob Wolf
LNC2 IO-360-B1F 75%

--
For archives and unsub http://lancaironline.net/lists/lml/