<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I need some additional input.  I am ready to start the process of
painting my 360.  I have thought of using the flight gloss system of
paints and primers.  As a person who has painting experience, I pelive
at this point that if done correctly, the system works.  One really
needs to use a pre-primer sealer since molded fiberglass parts have
holes that go very deep and need to be sealed.  Primers do this, but it
is a good idea to use a pre sealer first.  Also, TAKE YOUR TIME!!!  I
will update later after a try a few parts with the UV Smooth Prime.  I
will not be using the Top Gloss water base paint, but I will be using a
good urethane paint...Please send all comments to me, as I need
aditional input.

Roger Helmer
spaw@earthlink.net

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>