Message-ID: <3A2435DF.2E59C2CE@earthlink.net>
Date: Tue, 28 Nov 2000 15:46:55 -0700
From: Roger Helmer <spaw@earthlink.net>
To: lancair.list@olsusa.com
Subject: paint
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
I need some additional input.  I am ready to start the process of
painting my 360.  I have thought of using the flight gloss system of
paints and primers.  As a person who has painting experience, I pelive
at this point that if done correctly, the system works.  One really
needs to use a pre-primer sealer since molded fiberglass parts have
holes that go very deep and need to be sealed.  Primers do this, but it
is a good idea to use a pre sealer first.  Also, TAKE YOUR TIME!!!  I
will update later after a try a few parts with the UV Smooth Prime.  I
will not be using the Top Gloss water base paint, but I will be using a
good urethane paint...Please send all comments to me, as I need
aditional input.

Roger Helmer
spaw@earthlink.net

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>