I put my static ports (2) behind the back bulkhead, one on each side. I didn't like the plans location due to the plumping stuck inside the baggage area. So I just move it aft just behind the bulkhead one on each side tied together. It seems to work excellent, with no problems.
-----Original Message-----
From: randylsnarr <randylsnarr@yahoo.com>
To: lml <lml@lancaironline.net>
Sent: Wed, Aug 14, 2013 9:18 am
Subject: [LML] Static port placement 235/320/360 airframe
All, I am getting a slight amount of pressure in my static port which is causing
my indicated airspeed to read low. I have the 235 airframe and installed the
existing port on the passenger side baggage area just below the longeron. I am
looking for help on the initial placement and also am wondering if I need a
secondary port somewhere. If so, I am looking for feedback on where this should
be located.
Thanks on advance!
Randy Snarr
N694RS
235/320
Sent from my iPhone
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html