Mailing List lml@lancaironline.net Message #66100
From: William A. Hogarty <billhogarty@gmail.com>
Subject: Re: [LML] Nose gr dr brackets
Date: Sat, 6 Jul 2013 19:10:52 -0700
To: Lancair Mailing List <lml@lancaironline.net>
 Message Header

Undecoded Message
John:
 
Appreciate the assistance.  WOW, I forgot that there were 50+ rivits to drill out to reuse the hinge and top Hat pieces.  50 new holes to drill and countersink, then 50 new rivits to set. Plus the seven bolts needed.  OUCH........ New nose gear doors are turning out to be a major project.......
 
Why does it seem to take twice as long as it did when I was 10 years younger??????
 
Thanks again for the help, Bill H.


On Sun, Jun 23, 2013 at 4:41 AM, John Barrett <jbarrett@carbinge.com> wrote:

Bill,

Not sure if these are original brackets but with the post at 1.125" off the door, it works fine. The drawing tries to indicate the other hole is.925" from the door. Hope this helps












Sent from my iPhone
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster