Please don't ever drill plexiglas if you can avoid it.

Bruce
WWW.Glasair.org

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Bob Smiley
Sent: Sunday, November 20, 2011 6:58 PM
To: lml@lancaironline.net
Subject: [LML] Re: Window Bonding

Suggestion;

I assume you sanded the plexiglass to provide some tooth for hysol
bonding.
100 or lower grit. Another idea is drill holes through the plexiglass in
the
bonding area to allow hysol squeeze through and mechanical bonding on
the
back side.  I also incidently applied a two bid fiberglass over the
plexiglass bonding area and about 1/12 inches on the fuselage sidethus
capturing the glass.

Hope this helps out.

Bob Smiley
360 94RJ




--
For archives and unsub
http://mail.lancaironline.net:81/lists/lml/List.html