<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I am working on my ailerons and would like advise from anyone who has
incorporated the trim tab into the trailing edge similar to the elevator
trim tab.  While at Oshkosh I saw a few done very nicely in this manner.  I
talked with Brent R. and he advised on the size being about 1" x 10" as his
was only 8" and must have felt it was not optimum.  Did the servo stay in
the original location as my aileron already has the hole cut and nutplates
done?  Also, what was used for the hinge on the tab?  Although I feel
confident I can do this  I am sure someone has learned a few  tricks that
could save me a pile of hours.  Appreciate  any input on this.

Tom Sullivan
The Yupper (U.P. of MI.)

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html