<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Scott:

    If you think the errors I note which creep into the manifold pressure
gage are bad, be aware that the standard run of Cessna/Beech/Piper
tachometers are notoriously bad, frequently being off 100 RPM or more.  I
once knew how to check the gyro using the hour meter based on an article I
read.  The hour meter reads accurately (actual clock time) at a given RPM,
and it is a weird intermediate value like 2357 RPM or some such.  If one
starts a stopwatch when the hourmeter on the tach turns over to a new digit,
and you track it for a half hour or so, one can measure and correct the
error.  When my TR-182 was nearly new, I did such a check and found the tach
reading 83 RPM low, and I placarded it as such.  I no nonger complained when
it appeared to be turning about 100 RPM low on takeoff.  It was an
instrumentation error.  

So, in answer to your question: how do we set POWER if the manifold pressure
and tachometer instruments are so much in error?  The answer is: VERY
APPROXIMATELY.  


Sorry, but it's true.

Fred
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html