Posted for "glong2" <glong2@netzero.net>:

 Alan:
 
 I have the same setup in an ES and have the switches wired as you suggested
 except I swapped the aileron & rudder trim switches. My thinking was that
 the rudder trim is only used on takeoff & landing, but the aileron is used
 to balance gas throughput the flight. As it turns out I switch tanks often
 enough that I seldom use the aileron trim, so I believe your setup works
 fine. I also very seldom use the com1/com2 pinky switch because I like to
 look at the radio knob to see where the com is set without looking at the
 light that says the knob is reversed.
 
 Hope this helps.
 
 Eugene Long
 Lancair Super ES
 glong2@netzero.net