|
Hi Tom
I used the setup that Pat Cohenour provided
pictures for,
except instead of using a Teflon washer attached to
the
AL plate(I was concerned about binding) I used a
rubber
bellows boot that the rod goes through with the
bottom
of the boot attached to the AL plate. my IV is not
pressurized but I would think this system would work
with pressure.
Regards
Art
----- Original Message -----
Sent: Sunday, February 20, 2005 2:59
PM
Subject: [LML] 4P Pressurization @
Ailerons
Anyone have pictures of closing in the aileron
lower bellcrank area for pressurization rather than the boot & clamp
system? I am familiar with the idea, but have not seen any pictures of
the process or of a completed one. I can manage without, but surely at
more hours than with pictures.
Thanks,
Tom Sullivan
4PT in Upper
Michigan
|