|
|
Posted for "Timothy Ong" <timothy.ong@leadingedgeaircraft.com>:
If you have that much movement, I would use shim stock.
Absolutely do not weld it. This will locally change the heat treatment and
could possibly cause a local failure.
Regards,
Timothy Ong
<<As per Jim Scales and Bryan Burr,I also have a problem where the gear
leg
fits into the receptacle. I can move the bottom of the gear both in and
out
and back and forth approx.1/4 "I have no problems at the axel or axle
mount.
|
|