|
|
Posted for GLaznic@MCCUS.JNJ.com
FOR SALE
* *
*LANCAIR 360MK-II CARBON KIT: *One of the latest kits produced by the
factory, it’s of carbon-fiber construction (just like Legacy).
Approximately 80 to 85% completed by professional mechanical engineer,
with pride in workmanship. Regular EAA councilor inspections. Complete
logbook and progress pictures. Build and stored in heated and A/C
building. Total of over $72,000 invested up to date, all receipts are
available.
*AIRFRAME and work completed:*
- Carbon Fiber Super-Fast-Build kit
- Bottom fuselage in final prime
- Landing gears, linkages and its actuators, all doors, and hinges
- Wings closed with extended fuel tanks option
- Header tank and forward deck with side hinge latches
- All fuel tanks pressure tested to 1.6PSI, with fuel probes and
low level sensors, strainers
- Fuel transfer feature with el. pumps from tank to tank
- Removable wing tips with lights and acrylic lens, one VOR
antenna fitted
- Ailerons with hinges fitted to wings, counter weights, el. trim
- Horizontal stabilizer with elevator mounted, counter weight,
travel stops, el. trim
- Vertical stabilizer (left side) with all ribs and cap strips
and COM antenna
- Rudder completed with hinges, travel stops, all counter
weights, el. trim, white tail light fairing
- Flap’s bottom skin with hinges fitted to wings
- Flap’s torque tube and actuator completed
- Canopy’s hinges and pneumatic lifters with travel stops done
and tested.
- Canopy frame build with double (inside/outside) seal for
weather proofing
- Forward floors completed with hard point for rudders
- Rudder pedals both sides fitted and rudder’s cable guides
completed and tested
- Control sticks and push rods completed and tested for ailerons
and elevator
- NACA fresh air scoops bonded both sides
- Dual static ports installed
_LANCAIR OPTIONS_:
- Long engine mount and cowling
- Forward hinge canopy
- Adjustable rudder pedals with brakes, both sides
- Out-Back landing gear with large 2 pcs doors
- Hydraulically operated gear doors
- Central canopy latch system
- TK-5 Shocks
- Long tail – horizontal stabilizer and elevator
- Static discharge kit
_ACCESSORIES_:
- Navigation and strobe lights
- Custom power quadrant, three levers style with switch
- Infinity control sticks with switches and toggles
- Andyair fuel selector valve system “LEFT-RIGHT-OFF”
- Fuel filter
- Hydraulic filter
- Heated pitot tube
- Fire wall nose-wheel slot’s cover
- Interior HVAC valve
- Trim servo kits and indicators
- Custom jacks and rear hard point
- Facet fuel transfer pumps 2pcs.
- Other: e-glass & carbon cloth, hardware kit, cutting tools,
epoxy, glows, brushes, MC, etc.
_INSTRUMENTS_:
- AOA kit and instrument (Professional) Proprietary Software, Co.
- Speed indicator instrument with Lancair logo
- S.I.R.S. Compass
- J.P.I. - FS-450 fuel computer, instrument and sensor
- J.P.I - EGT/EGT instrument with all sensors + 2 spare
PRICE: $31,900
*ENGINE:*
Factory new 180H.P Lycoming IO360-B1F, 0 time. This engine is fully
pickled with removed accessories, opening closed and interiors flooded
with 41 QRT of oil w/ original factory crate and box
_ACCESSORIES & OPTIONS_:
- Standard injectors
- GAMI injectors
- Electric fuel boost pump (high pressure)
- Alternator kit 12V/60A
- S.S. exhaust kit with heat exchanger
- Hoses
- Baffling kit
- Andyair Fuel-Oil separator with condensation trap
- Engine stand on casters
PRICE: $21,900
*PROPELER:*
Factory new, constant speed Aero-Composite 2 blade 70” prop. 0 time
still in its original crate
- Spinner and back plate, balanced and pre-fitted to prop with
internal ribs and scribes, pre-drilled to match the back plate
- New Hydraulic Prop. Governor (McL.)
PRICE: $8,900
*OTHER items offered for sale:*
- Rotisserie stand for air frame
- Work benches 2 pcs
- Shelf
- Band saw
- Drill press
- Grinder/sander
- Remote “Hobby” fresh air system with 2 masks
- Air compressor 5H.P. with tools and hoses
- Paint spray system (professional)
- Dust collection-vacuum system with hoses
- Engine crane on casters
- 6H.P. vacuum “Craftsman”
- Pipe bending tool kit
- Pipe cutting & flaring tools
- Epoxy pump
PRICE:
Serious inquiries, please contact Garry Laznicka at W (215) 273-8343 or
H (610) 872-1272. Kit is located in Philadelphia, PA. GLaznic@MCCUS.JNJ.com
|
|