|
|
Dear Jeffrey,
Thank you for your interest in my "Box"! See attached file for the infos you
requested.
Here few of your Questions not directly handled in attached doc:
How does it know flap position?
=> The built-In Controller remembers in setup-Mode the
actual-flap-position due to Pos.-Sensor, which you
use to display the flap-position to the pilot. It then "saves" this
value to memory....
((and hopefully will refind it ;-) , NO, I'm shure it does !!! )
Does it have a multiple switches aka one for "flaps 1" Flaps 2 and so on
???
=> No! Only the standard-flap-switch (Up and Down).
What exactly does it do ??
=> It let you use and set the Flaps like a "cessna 172"...
You will have 4 consecutive Flap-positions (that you can easily define
yourself !!) .
(Suppose Flaps are full UP) With first short pulse of flap-switch
down, your flaps will be moved automatically to position Flaps1. With
another puls on flap-switch down, they will go to Flaps2-position an so on,
till full flaps down!
With Flap-switch UP pulses, they will return back, stepwise, until
Flap-Up position is reched.
For quick extension/retraction of flaps you may "give" multiple pulses
down or up! The FCTRL0002 then drives the
flaps directly to the desired flap-position without stopping at the
next "step"!
Hope the infos are usefull to you. Don't hesitate to ask, if you should have
any questions!!
Regards
Lino
------------------------------------------------------------
Lino Missaggia
Ing. Buero L. Missaggia
Elektronik-Engineering
Bahnhofstrasse 46
CH-9450 Altstaetten (SG)
Tel: +41 71 750 03 35
Fax: +41 71 750 03 36
Mail: lino.missaggia@m-engineering.net
Web: http://www.m-engineering.net
------------------------------------------------------------
|
|