|
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
<< Lancair Builders' Mail List >>
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I purchased a Model 35/40 EZ tow tug from PowerTow, www.powertow.com ,a few
years back when I had an A 36. It worked great. It has a forward and
reverse but no clutch. You lift the single tire off the ground as a
substitute for a clutch.
Now the good news. When I finished my IV I decided to see if I could make
it work. It turns out that all I had to do was remove the fittings that fit
in the A 36 nose wheel and turn them end for end and reinstall. They don't
fit exactly, but I've been using it for 6 years now with good success. If
you wanted to make the fittings fit perfectly you would have to make the
inside diameter a bit larger. You'll probably need a lathe to do this
properly.
The current price for the unit is $699. It still starts on one pull, even
after 10 years of use.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website: http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore: http://www.buildersbooks.com/lancair
Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
|
|