<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

I'm not sure what 'peening' really is but I just did some 1 1/4" control rods this weekend so I had to make a quess. I held the manufactured head against an anvil and formed the shop head with a hammer. The rivets were one size to large which is usually bad news with a squeezer or rivet gun, but worked very well with the hammer....Good luck!...Bill

LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.