|
|
|
Re: [FlyRotary] Re: Ivo prop
----- Original Message -----
Sent: Thursday, June 03, 2004 8:42
PM
Subject: [FlyRotary] Re: Ivo prop
On 6/3/04 9:16
PM, "sqpilot@earthlink" <sqpilot@earthlink.net>
wrote:
-----
Original Message -----
From: Bulent Aliev
<mailto:atlasyts@bellsouth.net>
To: Rotary motors in aircraft <mailto:flyrotary@lancaironline.net>
Sent: Wednesday, June 02, 2004 9:06
PM
Subject: [FlyRotary] Ivo
prop
Steve, here is a photo of the angle
of attack close to the hub on the prop that Perry Mick designed for
me. Compare that to the Ivo.
Bulent
Hi, Bulent....I was
looking at the picture of the prop (nice) that you sent, and I
couldn't help but notice the PSRU. It looks like Tracy's, but
the cast aluminum (?) housing does not look like his....It looks
more like the Ross. I like that. More info please?
Thanks for your reply. Paul
Conner
Paul, my engine’s starter is the same as the
20B, tucked under the spark plugs. It mounts to the bellhousing and the
engine block. That’s why I used the bellhousing and made adapter plate to
fit Tracy’s gear box. That moved the gear box about 3” further than Tracy’s
standard plate. The problemis that Trcy had to make a longer drive
shaft.
Bulent
Thanks, Bulent....looks nice. Paul
Conner
>> Homepage:
http://www.flyrotary.com/
>> Archive:
http://lancaironline.net/lists/flyrotary/List.html
|
|