On 6/3/04 9:16 PM, "sqpilot@earthlink" <sqpilot@earthlink.net> wrote:

----- Original Message -----
 
From:  Bulent  Aliev <mailto:atlasyts@bellsouth.net>  
 
To: Rotary motors in aircraft <mailto:flyrotary@lancaironline.net>  
 
Sent: Wednesday, June 02, 2004 9:06  PM
 
Subject: [FlyRotary] Ivo prop
 

 
Steve, here is a photo  of the angle of attack close to the hub on the prop that Perry Mick designed  for me. Compare that to the Ivo.
Bulent
 
Hi, Bulent....I was  looking at the picture of the prop (nice) that you sent, and I couldn't help  but notice the PSRU.  It looks like Tracy's, but the cast aluminum (?)  housing does not look like his....It looks more like the Ross.  I like  that.  More info please?   Thanks for your reply.  Paul  Conner

Paul, my engine’s starter is the same as the 20B, tucked under the spark plugs. It mounts to the bellhousing and the engine block. That’s why I used the bellhousing and made adapter plate to fit Tracy’s gear box. That moved the gear box about 3” further than Tracy’s standard plate. The problemis that Trcy had to make a longer drive shaft.
Bulent