|
|
You are correct, Dave.
I found that things that cooled well on the ground sucked in the air and
vice versa, best explanation I have is the flow dynamics apparently change
when you greatly increase the airflow velcocity. The other explanation is
that short duration run ups on the ground benefit from the thermal inertia?
The engine, coolant, etc., may not have really had time to reach
equilibrium - in the air the continuos heat load quickly reaches equilibrium
which may result in higher temps than observed on the ground.
Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message ----- From: "DaveLeonard" <daveleonard@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, May 22, 2004 1:41 AM
Subject: [FlyRotary] Re: First Flight Report - It Flies !
Yee Ha Steve. Another project to move into the flying aircraft page of
the
rotary roster. Sorry about the temps, I guess that ground cooling is not
a
good indication. Makes me a little worried too.
Cant wait to hear more flight reports.
Dave Leonard
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|