Mailing List flyrotary@lancaironline.net Message #7889
From: Michael McGee <jmpcrftr@teleport.com>
Subject: Re: [FlyRotary] Injectors Physical Dimensions
Date: Fri, 07 May 2004 07:23:23 -0700
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Ah-ha!  Thanks I'll verify that the injectors I buy will fit those holes.
Mike

At 04:56 2004-05-07, you wrote:
I presume you are aware that not all injectors will fit in the Mazda engine
block hole.  If you are installing them elsewhere then you can always
machine the injector holders (or buy) the proper size. But, if installing
the two in the block,  You just need to make certain the size fits the block
holes.

Ed

Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
From: <kenpowell@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, May 06, 2004 10:27 PM
Subject: [FlyRotary] Re: fuel injector prices


> Mike,
> I'm not near close enough to need new injectors; however, if no one else
wants to slit a set I would be willing to go ahead and buy 4.  Let's give it
a couple of days to see if anyone else wants to jump in; otherwise I'll go
ahead and split a set with you.  BTW, I'headed to Orlando for a family
vacation tomorrow so I don't know if I'll be on the Internet after about
2:00 tommoorrow afternoon so if I don't answer you'll know why.
>
> Ken P.
> >
> > >--------------------------------------------------------------------
> > >Take a look in the Mustang magazines:  38 and 42 lb injectors sell for
> > >between $295 and $395 for a set of eight.  So call it $200 for a set of
4
> > >if you split the costs with someone else.  Brands vary, but are usually
> > >Bosch.  I'm going to start with 38 lb injectors at 38 PSI - should be
good
> > >for about 230 HP at 80% duty cycle and 0.5 BSFC.  Would also be good
for
> > >~245 HP at 44 psi.  Note that if NA these will not be working very hard
at
> > >cruise altitudes.  If turbo I would probably go with the 42's just to
keep
> > >the duty cycle a little lower.
> > >
> > >Ken P.
> >
> > I'm due to order a set of injectors myself.  Do you want to split a set
of 38s?
> > Mike
> >
> > Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
> > 13B in gestation mode, RD-1C, EC-2
> >
> >
> >
> > >>  Homepage:  http://www.flyrotary.com/
> > >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>



>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster