|
|
As long as the coolant temperature is below the boiling point, pressure
would be the only indication of a leak. Once the boiling pressure is
reached, the temperature indication again does not increase until the
temperature sensor is getting out of the liquid coolant.
Therefore, water pressure gauge!
Richard Sohn
N-2071U
unicorn@gdsys.net
www.gdsys.net/WWWmembers/unicorn/
----- Original Message -----
From: "Peter Cowan/Lexy Cameron" <cowcam@pipcom.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, March 04, 2004 9:01 AM
Subject: [FlyRotary] Re: Ideal Cooling System Plumbing (was Re: [FlyRotary]
Re: overflow connections
Here is another one but may not handle high temps:
http://www.aqualarm.net/
I think Finn is correct on this in that if there is a pin hole
leak the pressure could stay up until it is blowing air or steam.
Peter
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|