|
|
Andrew, for heat shielding I would recommend a layer “fiberfrax” … http://www.fiberfrax.com/ against the fiberglass cowling, covered with a layer of aluminum closest to heat source.
Works for me … Jeff
|
From:
|
Bill Bradburry <flyrotary@lancaironline.net>
|
|
Subject:
|
RE: [FlyRotary] Re: West Aussie Rotary
|
|
Date:
|
Mon, 29 Jun 2015 09:33:56 -0500
|
|
To:
|
'Rotary motors in aircraft' <flyrotary@lancaironline.net>
|
|
|
|
|
Andrew,
That radiator looks like my first install attempt except I fed it with a duct that came in on the lower
left side instead of underneath.
I doubt foil will solve your blistering paint problem. That exhaust is hot! I have a muffler that is
over 15MM from the cowl and with foil on the cowl the paint still blisters.
Bill
|
This message, and the documents attached hereto, is intended only for the addressee and may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately
so that we may correct our internal records. Please then delete the original message. Thank you.
|
|