On Thu, Aug 15, 2013 at 7:17 AM, <jskmberki@windstream.net> wrote:

Hi,
I am trying to put together an engine monitor to measure oil temp, oil pressure, water temp, water pressure, fuel pressure, EGTs, tach,air pressure (for delta P across the rad).  I am using an EC4 to get the P Port running and will switch to something else (EC-3) for flight.  Sending units need to be as close to working values as possible.  The GM temp sensor looks like it will work for water and oil and i got a program working using an arduino board USBed to my PC.  The VDO 360-009 0-80PSI looks like it would work for oil pressure and the VDO 360-043 Looks like it would work for water pressure. 0-30psi.  What is every one using for fuel pressure?  I believe the target is 38 psi for the pumps that John used.  I found an app for apple devices that displays data and gets it via wifi.  There is a wifi sheild for the arduino so it looks doable.  Thought it would work while I dial in the P Port.  Can the  engine monito and ECU share sensor inputs?  Does there need to be signal conditioning?  Appreciate any help / input.

Joe Berki
Limo EZ
P Port


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html