Mailing List flyrotary@lancaironline.net Message #55800
From: Tracy <rwstracy@gmail.com>
Subject: Re: [FlyRotary] Re: Ok Here are the important flywheel measurements
Date: Sun, 17 Jul 2011 17:17:45 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
a kelly wrote:

.Did you replace the
aluminum rivets in your RD1X damper plate with steel bolts ?..............I seem to remember that
you did after several dampers (and yours) experienced alum streaking around the rivets...........


Just FYI to the group,  the change I settled on for the damper rivets was to use -AD rivets instead of -A.   The tensile strength is about 3 times higher on the -AD.

Tracy

Sent from my iPad

On Jul 17, 2011, at 4:45 PM, Kelly Troyer <keltro@att.net> wrote:

.Did you replace the
aluminum rivets in your RD1X damper plate with steel bolts ?..............I seem to remember that
you did after several dampers (and yours) experienced alum streaking around the rivets...........
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster