|
|
| Here is what the factory says:
"B2 is a stainless that was imported from Japan in sheet form. It has similar characteristics to cold rolled steel but wont rust and also wont polish up like a 304 or a 4 series stainless. "If you are going to tig weld it use a standard stainless steel rod no matter the grade and try to keep the heat down to a minimum." Regards, Justin Moore TFI Marketing
Best Regards,
Steve Thomas
_______________________________________________________
On Apr 25, 2011, at 8:16 AM, Mark Steitle wrote: Steve,
It appears that B2 SS is used for flatware, heaters, etc. It welded easily with 321SS rod. You may want to shoot DNA an email and see what rod they recommend.
Mark
On Mon, Apr 25, 2011 at 9:49 AM, Steve Thomas <glasair2@me.com> wrote:
Mark,
The web site lists the material used in the construction of the muffler as "B2 Stainless." What is that? What do I tell my welder who will be requested to weld a 321 stainless transition to it?
Best Regards,
Steve Thomas
_______________________________________________________
On Apr 22, 2011, at 12:37 PM, Mark Steitle wrote:
> Steve,
>
> Way to go! It should outlast your airframe.
>
> Mark
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|