Will the Renesis pump capacity pump enough water to
cool a 350 hp 3-rotor. Who knows? Frankly, I don't even know how
much flow we're talking about here. For safety sake, if a better impeller
was available, I would most likely buy it.
Mark;
As a
point of reference; 260 hp, and 30 degree delta T needs about 40 gpm. You can scale
up or down from there. At 6000 rpm I’m guessing the pump will give
you that, but of course depends on the delta P around the loop. If you’re
expecting 350 hp, things might be marginal; basically higher delta T, which reduces
overall effectiveness of the system a bit. But if you have some excess capacity
there - - I guess you’ll find out.
Al G