Ah thank weuns need to git a camera over
ta yore house!
All this stealth work is making us crazy!
Bill B
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of Mark Steitle
Sent: Tuesday, April 20, 2010 4:27
PM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Re: Renesis
CAS Trigger Wheel Dims
Sorry Bill, it was IFR all weekend and I didn't get to fly. Then
I was checking things on Saturday and noticed my water pump dripping coolant
from the seal. So, I've decided to go ahead and install a Renesis water
pump. I had purchased a Renesis wp and front cover about a year ago with
the intent of changing over. Since the Renesis wp is integral with the
front cover, I had to band saw the wp housing from the front cover. I
will be using it and the Renesis wp cartridge and discarding the rest. I
will also have to use the Renesis front hub in order to get the pulleys to line
up. This has required some minor machine work to the Renesis hub as it is
different from the 20B hub. (That's why I was asking for the dimensions
for the CAS trigger wheel.) All of this will save about 7.5#.
As for my impressions of the p-port motor, so far I'm very happy with
it. Idle is acceptable and power is noticably increased over the side
port motor. The intake is much lighter and simpler to fabricate (except
for machining the housings which you could farm out). Everything else
connects with hose clamps.
Mark S.
On Tue, Apr 20, 2010 at 3:00 PM, Bill Bradburry <bbradburry@bellsouth.net> wrote:
Mark,
Speaking of a two hour drive….did you get in the air this
weekend??
Report on the PPort!!
Bill B
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net]
On Behalf Of Mark Steitle
Sent: Tuesday, April 20, 2010 2:54
PM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Renesis CAS
Trigger Wheel Dims
Does anyone happen
to know the thickness of the Renesis crank trigger wheel? This is the
toothed wheel that triggers the ignition & injectors. I need to know
the exact thickness of the timing wheel. If anyone can send me this
dimension I would be very appreciative as it would save me a two hour drive.